Re: [squid-users] Delay Pools configuration

Rob Asher wrote:
> I have a question about my delay pools config on squid2.6.STABLE13 The setup below works as expected for the delay classes 2 thru 5 but class 1 is never used. What I'm wanting is a way to have exceptions for certain destinations but I'd also like to have a limit on them as well. As it works now, the exceptions are not limited and in delay pool 0. Any ideas are appreciated.
>
>
> ################################################################################
> # Delay Pools Config
> ################################################################################
> # network bandwidth controls
> acl nat src 10.56.22.0/255.255.254.0
> acl pub1 src 170.211.125.0/255.255.255.128
> acl pub2 src 165.29.119.128/255.255.255.128
> acl webmail dst 170.211.125.120/32
> acl exceptions dst "/etc/squid/exceptions.list"
>
> # School hours are Monday - Friday 8AM to 3:15PM. Allow first hour more bandwidth
> # for checking email, downloads, etc. After hours allow 3.0 Mbit/s with no individual limit.
> acl school_hours time MTWHF 09:00-15:15
>
> delay_pools 5
>
> delay_class 1 2 #- NEVER USED?
> # Don't delay local webmail traffic or other exceptions.

Incorrect.The access rule below says cap if they are using webmail AND
are in exceptions AND are in school hours.

You want:
   delay_access 1 allow webmail school_hours
   delay_access 1 allow exceptions school_hours
   delay_access 1 deny all

> delay_parameters 1 -1/-1 320000/320000
> delay_access 1 allow webmail exceptions school_hours
> delay_access 1 deny all
>
>
> delay_class 2 3
> # NAT range - 10.56.22.0 thru 10.56.23.254
> delay_parameters 2 384000/384000 162000/162000 48000/162000
> delay_access 2 allow nat !webmail !exceptions school_hours
> delay_access 2 deny all
>
>
> delay_class 3 2
> # public range 1 - 170.211.125.0 thru 170.211.125.127
> delay_parameters 3 160000/384000 48000/384000
> delay_access 3 allow pub1 !webmail !exceptions school_hours
> delay_access 3 deny all
>
>
> delay_class 4 2
> # public range 2 - 165.29.119.128 thru 165.29.119.254
> delay_parameters 4 160000/384000 48000/384000
> delay_access 4 allow pub2 !webmail !exceptions school_hours
> delay_access 4 deny all
>
>
> delay_class 5 2
> # wide open after hours.....almost!
> delay_parameters 5 384000/384000 384000/384000
> delay_access 5 allow all !school_hours
> delay_access 5 deny all
>
>
> delay_initial_bucket_level 75
>
> ################################################################################
>

Amos

-- 
Please use Squid 2.6.STABLE20 or 3.0.STABLE5