RE: Squid on SCO - how to install?

When I said I compiled it I meant it used gcc to compile and obviously
all the files required (headers etc) were found because I installed them
(or maybe the path was set correctly) when I installed the SCO
development software.

Obviously, this isn't particularly good. I would've thought that the
libraries for SCO compiler would've been somewhat different to those
required by gcc.

Nevertheless it seemed to compile.

Now I don't have any "make" to use. DOH!

Mike

> ----------
> From: Mike
> Sent: Friday, March 20, 1998 1:40 PM
> To: 'Daniel Kiracofe'
> Cc: 'squid-users@nlanr.net'
> Subject: RE: Squid on SCO - how to install?
>
> OK, this is what I've done.
>
> I thought I'd install the SCO development kit which includes the SCO
> compiler and make, etc etc.
>
> I installed it although it's not licenced so I can't actually run a
> SCO
> compile or make. In other words I copied all the files but when I try
> to
> run cc it fails with a Warning: unlicenced message.
>
> I then ran ./configure and the compile took place. From the list of
> messages I would say it looks OK. If anyone doubts this I will do it
> again and provide the log to you.
>
> Now I need to run make. Unfortunately, the SCO make is unlicenced so
> it
> doesn't run either. I can't find make in the gcc files. Does this mean
> I'm totally stuck now or is there a make somewhere I can use?
>
> Thanks
>
> Mike
>
>
> > ----------
> > From: Daniel Kiracofe[SMTP:drk@gurulink.com]
> > Sent: Friday, March 20, 1998 5:33 AM
> > To: Mike
> > Subject: RE: Squid on SCO - how to install?
> >
> > > The problem now is, why is gcc not finding the header files like
> > > stdio.h.
> > >
> > > Well, I did a search for stdio.h and found it in, wait for it...
> > >
> > > /usr/local/lib/gcc-lib/486-sco3.2v5.0/include/oldstyle/
> > >
> > > Why? What do I do now?
> >
> > Well, by default, the c compiler will only look for includes in
> > certain
> > well know locations, like /usr/include, /usr/local/include, etc.
> You
> > have
> > two options:
> > 1. Move all the .h files from the above directory to /usr/include
> > 2. Tell gcc to look in the above directory. I'd recommend this
> > method.
> > In the file src/Makefile.in you should see a line reading:
> >
> > INCLUDE = -I. -I../include -I$(srcdir)/../include
> >
> > add to it:
> >
> > -I/usr/local/lib/gcc-lib/486-sco3.2v5.0/include/oldstyle/
> >
> > Then run configure again. That should remake the Makefiles to
> > include
> > this change...
> >
> > /* Daniel */
> > WWW: http://users.gurulink.com/drk
> > Linux Consultation Specializing in TCP/IP Networking and Web Caching
> >
> > "Fear is only afraid of the absence of itself" - Mediocrates
> >
> >
>
Received on Thu Mar 19 1998 - 18:03:17 MST