RE: [SQU] Compile problem with ntlm

Can you please mail me your ntlm_auth.c? gzip or bzip2 is fine.

Rob

> -----Original Message-----
> From: Richard Whelan [mailto:rwhelan@highwayone.net]
> Sent: Tuesday, 21 November 2000 2:48 AM
> To: Robert Collins; squid-users@ircache.net
> Cc: Craig Fels
> Subject: RE: [SQU] Compile problem with ntlm
>
>
> Craig,
>
> Just pulled down the latest squid-head, and the repulled down the ntlm
> patch, which has changed. Applying that patch now complains in two
> locations. One is on version.h, which considering that patch
> looks for 2.5
> and this is the 2.4 release, I would expect, and on the
> pump.c file again.
> Other than that, straight through this time.
>
> Ran, autoconf, autoheader.
>
> Did the configure, and typed make.
>
> The initial compile does through, I have a squid executable,
> but when it
> gets to the ntlm section it dies with the same message.
>
> Making all in ntlm_auth_modules...
> make[1]: Entering directory
> `/home/software/Src/Squid/New/squid-2.4-200011200000/ntlm_auth
> _modules'
> make[2]: Entering directory
> `/home/software/Src/Squid/New/squid-2.4-200011200000/ntlm_auth
> _modules/NTLMS
> SP'
> gcc -g -O2 -Wall -I. -I../../include -I./smbval
> -I../../include -c -o
> ntlm_auth.o ntlm_auth.c
> In file included from ntlm_auth.c:37:
> ntlm.h:167: parse error before `u_int32_t'
> ntlm.h:167: warning: no semicolon at end of struct or union
> ntlm.h:171: parse error before `}'
> ntlm.h:177: parse error before `u_int32_t'
> ntlm.h:177: warning: no semicolon at end of struct or union
> ntlm.h:179: parse error before `context_low'
> ntlm.h:179: warning: type defaults to `int' in declaration of
> `context_low'
> ntlm.h:179: warning: data definition has no type or storage class
> ntlm.h:180: parse error before `context_high'
> ntlm.h:180: warning: type defaults to `int' in declaration of
> `context_high'
> ntlm.h:180: warning: data definition has no type or storage class
> ntlm.h:182: parse error before `}'
> ntlm_auth.c:76: conflicting types for `domain'
> ntlm.h:168: previous declaration of `domain'
> ntlm_auth.c: In function `cleanup_cache':
> ntlm_auth.c:124: warning: int format, pid_t arg (arg 3)
> ntlm_auth.c: In function `refresh_challenge':
> ntlm_auth.c:164: warning: int format, pid_t arg (arg 3)
> ntlm_auth.c: In function `housekeep':
> ntlm_auth.c:181: warning: int format, pid_t arg (arg 3)
> ntlm_auth.c: In function `manage_request':
> ntlm_auth.c:327: warning: int format, pid_t arg (arg 3)
> ntlm_auth.c:330: warning: int format, pid_t arg (arg 3)
> ntlm_auth.c:331: warning: int format, pid_t arg (arg 3)
> ntlm_auth.c:381: warning: int format, pid_t arg (arg 3)
> ntlm_auth.c:395: warning: int format, pid_t arg (arg 3)
> ntlm_auth.c:426: warning: int format, pid_t arg (arg 3)
> ntlm_auth.c:429: warning: int format, pid_t arg (arg 3)
> ntlm_auth.c:430: warning: int format, pid_t arg (arg 3)
> ntlm_auth.c:435: warning: int format, pid_t arg (arg 3)
> ntlm_auth.c:461: warning: int format, pid_t arg (arg 3)
> ntlm_auth.c:463: warning: int format, pid_t arg (arg 3)
> ntlm_auth.c: In function `main':
> ntlm_auth.c:487: warning: int format, pid_t arg (arg 3)
> ntlm_auth.c:491: warning: int format, pid_t arg (arg 3)
> ntlm_auth.c:503: warning: int format, pid_t arg (arg 3)
> ntlm_auth.c:511: warning: int format, pid_t arg (arg 3)
> ntlm_auth.c:515: warning: int format, pid_t arg (arg 3)
> ntlm_auth.c:520: warning: int format, pid_t arg (arg 3)
> make[2]: *** [ntlm_auth.o] Error 1
> make[2]: Leaving directory
> `/home/software/Src/Squid/New/squid-2.4-200011200000/ntlm_auth
> _modules/NTLMS
> SP'
> make[1]: *** [all] Error 1
> make[1]: Leaving directory
> `/home/software/Src/Squid/New/squid-2.4-200011200000/ntlm_auth
> _modules'
> make: *** [all] Error 1
>
> Any more ideas ?
>
> Cheers,
>
> Richard
>
> -----Original Message-----
> From: Craig Fels [mailto:csfels@swbell.net]
> Sent: 20 November 2000 14:51
> To: Richard Whelan; Robert Collins; squid-users@ircache.net
> Subject: Re: [SQU] Compile problem with ntlm
>
>
> Richard,
>
> I applied the ntlm.patch to squid-head-20001113000.tar.gz.
> I've had the
> best luck applying the patch to this snapshot of Squid. I
> also get the
> reversed patch on pump.c but everything else was OK (SO FAR!).
>
> Don't forget, after applying the patch run:
>
> autoconf
> autoheader
>
> then
>
> make distclean
> ./configure --enable-auth_modules="NCSA,
> NTLM" --enable-ntlm-auth-modules=NTLMSSP etc.....
> make
> make install
>
> This is where I am right now.
> I have just modified my squid.conf file and I need to
> remember how to link a
> directory to another location. Squid's executable is looking
> for squid.conf
> in /etc/squid but its compiled in /usr/local/squid/etc/
>
> Good luck....
> Craig
>
>
> ----- Original Message -----
> From: "Richard Whelan" <rwhelan@highwayone.net>
> To: "Robert Collins" <robert.collins@itdomain.com.au>;
> <squid-users@ircache.net>
> Sent: Monday, November 20, 2000 4:14 AM
> Subject: RE: [SQU] Compile problem with ntlm
>
>
> > Robert,
> >
> > The problem I had with the patch differed depending on
> which version of
> > squid it was applied against. If it was applied to the CVS
> version from
> the
> > sourceforge site, I get three errors. One is the reverse
> patch, in pump.c,
> > which from seeing previous messages can be ignored. The second is in
> > version.c, as the version details you have in the CVS
> version, says 2.5,
> and
> > the patch is looking for 2.4DEVEL4. This obviously goes
> away when applied
> to
> > a 2.4 cut. The last one, seems to be there regardless. It is in
> > access_log.c. It fails on the second section, starting a
> line 251. I made
> > the changes by hand for this part.
> >
> > The error message on compile was what was in the original message:
> >
> > Making all in ntlm_auth_modules...
> > make[1]: Entering directory
> >
> `/home/software/Src/Squid/New/squid-2.4-200011150000/ntlm_auth
> _modules'
> > make[2]: Entering directory
> >
> `/home/software/Src/Squid/New/squid-2.4-200011150000/ntlm_auth
> _modules/NTLMS
> > SP'
> > gcc -g -O2 -Wall -I. -I../../include -I./smbval
> -I../../include -c -o
> > ntlm_auth.o ntlm_auth.c
> > In file included from ntlm_auth.c:37:
> > ntlm.h:167: parse error before `u_int32_t'
> > ntlm.h:167: warning: no semicolon at end of struct or union
> > ntlm.h:171: parse error before `}'
> > ntlm.h:177: parse error before `u_int32_t'
> > ntlm.h:177: warning: no semicolon at end of struct or union
> > ntlm.h:179: parse error before `context_low'
> > ntlm.h:179: warning: type defaults to `int' in declaration of
> `context_low'
> > ntlm.h:179: warning: data definition has no type or storage class
> > ntlm.h:180: parse error before `context_high'
> > ntlm.h:180: warning: type defaults to `int' in declaration of
> `context_high'
> > ntlm.h:180: warning: data definition has no type or storage class
> > ntlm.h:182: parse error before `}'
> > ntlm_auth.c:76: conflicting types for `domain'
> > ntlm.h:168: previous declaration of `domain'
> > ntlm_auth.c: In function `cleanup_cache':
> > ntlm_auth.c:124: warning: int format, pid_t arg (arg 3)
> > ntlm_auth.c: In function `refresh_challenge':
> > ntlm_auth.c:164: warning: int format, pid_t arg (arg 3)
> > ntlm_auth.c: In function `housekeep':
> > ntlm_auth.c:181: warning: int format, pid_t arg (arg 3)
> > ntlm_auth.c: In function `manage_request':
> > ntlm_auth.c:327: warning: int format, pid_t arg (arg 3)
> > ntlm_auth.c:330: warning: int format, pid_t arg (arg 3)
> > ntlm_auth.c:331: warning: int format, pid_t arg (arg 3)
> > ntlm_auth.c:381: warning: int format, pid_t arg (arg 3)
> > ntlm_auth.c:395: warning: int format, pid_t arg (arg 3)
> > ntlm_auth.c:426: warning: int format, pid_t arg (arg 3)
> > ntlm_auth.c:429: warning: int format, pid_t arg (arg 3)
> > ntlm_auth.c:430: warning: int format, pid_t arg (arg 3)
> > ntlm_auth.c:435: warning: int format, pid_t arg (arg 3)
> > ntlm_auth.c:461: warning: int format, pid_t arg (arg 3)
> > ntlm_auth.c:463: warning: int format, pid_t arg (arg 3)
> > ntlm_auth.c: In function `main':
> > ntlm_auth.c:487: warning: int format, pid_t arg (arg 3)
> > ntlm_auth.c:491: warning: int format, pid_t arg (arg 3)
> > ntlm_auth.c:503: warning: int format, pid_t arg (arg 3)
> > ntlm_auth.c:511: warning: int format, pid_t arg (arg 3)
> > ntlm_auth.c:515: warning: int format, pid_t arg (arg 3)
> > ntlm_auth.c:520: warning: int format, pid_t arg (arg 3)
> > make[2]: *** [ntlm_auth.o] Error 1
> > make[2]: Leaving directory
> >
> `/home/software/Src/Squid/New/squid-2.4-200011150000/ntlm_auth
> _modules/NTLMS
> > SP'
> > make[1]: *** [all] Error 1
> > make[1]: Leaving directory
> >
> `/home/software/Src/Squid/New/squid-2.4-200011150000/ntlm_auth
> _modules'
> > make: *** [all] Error 1
> >
> > I hope this helps.
> >
> > Cheers,
> >
> > Richard
> >
> > -----Original Message-----
> > From: Robert Collins [mailto:robert.collins@itdomain.com.au]
> > Sent: 16 November 2000 22:35
> > To: Richard Whelan; squid-users@ircache.net
> > Subject: Re: [SQU] Compile problem with ntlm
> >
> >
> >
> > ----- Original Message -----
> > From: "Richard Whelan" <rwhelan@highwayone.net>
> > To: <squid-users@ircache.net>
> > Sent: Friday, November 17, 2000 1:30 AM
> > Subject: [SQU] Compile problem with ntlm
> >
> >
> > > Thought this looked like a useful addon, as I'm looking
> at implementing
> > > authentication.
> > >
> > > I'm currently running 2.3STABLE3, but for this I have
> basically followed
> > the
> > > comments already made in this list.
> > >
> > > I have tried both the daily snapshot version,
> squid-2.4-20001115000 off
> > the
> > > main Squid site, and the CVS version from
> squid.sourceforge (2.5 ??).
> > >
> > > I couldn't get the patch to apply, until I pulled down
> GNU patch, and
> then
> > > it all went through OK, except for two/three areas.
> Nothing major there.
> >
> > Please report the failed areas. Without those we cannot
> even guess.....
> >
> > > Ran autoheader, autoconf, and then set off the configure. Again no
> problem
> > > there.
> >
> > good.
> >
> > > When it gets to the compilation of the ntlm code though,
> it bombs. Not
> > being
> > > a developer, I wouldn't have the first clue where to
> look, so here is
> what
> > I
> > > get.
> >
> > <snip>
> >
> > Rob
> >
> > --
> > To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
> >
>
>
> --------------------------------------------------------------
> --------------
> ----
>
>
> > ----------------------------------------- (on ukadmin1)
> >
> > This email and any files transmitted with it are confidential and
> > intended solely for the use of the individual or entity to whom they
> > are addressed. If you have received this email in error
> please notify
> > the system manager.
> >
> > This footnote also confirms that this email message has
> been swept by
> > AntiVirus VirusWall for the presence of computer viruses.
> >
> > HighwayOne Corporation Ltd
> >
> > ---------------------------------------------------------
> >
>
> --
> To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
>

--
To unsubscribe, see http://www.squid-cache.org/mailing-lists.html