Re: [squid-users] Re: Satellite

Ok.

let see.

>>>>>>>>>>>>>>>You said

If you need to have different outgoing IP's for different classes of
users then there is an unofficial patch to extend Squid with such
selections. See
http://squid.sourceforge.net/cgi-bin/diff/rvenning_tosaddracl

>>>>>>>>>>>>>>>>>>>>>>>>>>>

So I can have squid use a different IP (represent) for each Class C that we
are using?

Thank you very much.

Best regards,

Edward Millington
(Network Administrator & Senior Technical Support Technician)
Cariaccess Communications Ltd.
Carlisle House
Hincks Street
Bridgetown
Barbados
1-246-430-7435
Fax : 1-246-431-0170
www.cariaccess.com
----- Original Message -----
From: "Henrik Nordstrom" <hno@hem.passagen.se>
To: "Edward" <edward@cariaccess.com>
Cc: "Squid Users" <squid-users@squid-cache.org>
Sent: Thursday, April 26, 2001 3:51 AM
Subject: Re: [squid-users] Re: Satellite

> Already told you how to tell Squid what IP to use for outgoing
> connections. How you then route traffic from that IP is your problem,
> not Squid's.
>
> And yes Squid is a proxy, which is an application to application gateway
> running at level 7. Any requests made by Squid will be from the server
> where Squid is running, not the client.
>
> If you need to have different outgoing IP's for different classes of
> users then there is an unofficial patch to extend Squid with such
> selections. See
> http://squid.sourceforge.net/cgi-bin/diff/rvenning_tosaddracl
>
> (works with the Squid-2.5 snapshots I think)
>
> --
> Henrik Nordstrom
> Squid Hacker
>
>
> Edward wrote:
> >
> > Hi Henrik!
> >
> > With squid enable using cisco route policy, the test IP which we are
using
> > will not route throught the SAT.
> >
> > Most probably, the squid is contacting the servers as a proxy with its
IP
> > address.
> >
> > How can I solve this problem?
> >
> > Thank you very much.
> >
> > Best regards,
> >
> > Edward Millington
> > (Network Administrator & Senior Technical Support Technician)
> > Cariaccess Communications Ltd.
> > Bridgetown
> > Barbados
> > 1-246-430-7435
> > Fax : 1-246-431-0170
> > edward@cariaccess.com
> > www.cariaccess.com
> > ----- Original Message -----
> > From: "Henrik Nordstrom" <hno@hem.passagen.se>
> > To: "Edward" <edward@cariaccess.com>
> > Sent: Wednesday, April 25, 2001 5:54 PM
> > Subject: Re: Satellite
> >
> > > What you have in Squid is tcp_outgoing_address. Might work four you.
> > >
> > > And please address questions to squid-users (not privately), and only
> > > one copy of the same question per week.
> > >
> > >
> > > Edward wrote:
> > > >
> > > > Hi there!
> > > >
> > > > I am running squid 2.4 Stable 1 on Redhat 7.0 Kernel 2.2.17.
> > > >
> > > > We are an ISP
> > > >
> > > > We have 2 Class C's. one for our net work and one for our dial up
> > customers.
> > > >
> > > > We want to use the 1 of those class C for Satellite routing.
> > > >
> > > > Ie. The class C for our dialup will go throught our telecom provider
and
> > > > routed back through the SAT for downloading.
> > > >
> > > > Do I have to configure squid to let the client use the bandwidht on
the
> > sat
> > > > instead of using out telecom provider bandwidth?
> > > >
> > > > In other words, squid my download throught the SAT for dialup
customers.
> > > >
> > > > Thank you very much.
> > > >
> > > > Best regards,
> > > >
> > > > Edward Millington
> > > > (Network Administrator & Senior Technical Support Technician)
> > > > Cariaccess Communications Ltd.
> > > > Carlisle House
> > > > Hincks Street
> > > > Bridgetown
> > > > Barbados
> > > > 1-246-430-7435
> > > > Fax : 1-246-431-0170
> > > > www.cariaccess.com
> > >
>
>
Received on Thu Apr 26 2001 - 04:09:30 MDT