RE: [squid-users] dual nic setup for SQUID

Here is the way that our network is laid out..

Internet ―--------------------BorderManager-----------------------End User LAN
    | |
    | |
    +-------------------------------SQUID---------------------

The def. route for end user lan is the bordermanger, however, you can manually configure IE for the squid server. I think bordermanager is the culprit here.

>>> "Peter Kassies" <p.kassies@ptt-post.nl> 06/06/01 03:23AM >>>

Mike,
 
Here is a little drawing (how it sorta looks in our network)
 
 
    internet
        |
    firewall---------------------------------------- dmz lan
                                |
                            proxyserver
                                |
                -------------------------------------- end user lan
 
So what you have to do is configure the nics with a different ipadres. Of course the ipadres for the internal side is the ipaddress on the end user lan.
I have proxy listning to port 8080 so all endusers have to configure the internal ipadres of the proxyserver and the port in their browser.
 
The proxyserver has a dns on the internet in its /etc/resolv.conf and resolves all urls and fetches the content from websites on the internet.
 
Peter
 
 
 
-----Oorspronkelijk bericht-----
Van: Mike Singleton [mailto:MSingle@davita.com]
Verzonden: Tuesday, June 05, 2001 6:25 PM
Aan: p.kassies@ptt-post.nl
Onderwerp: RE: [squid-users] dual nic setup for SQUID

Cool... thanks... but I have a few questions...
How do I configure Squid to listen inside??

>>> "Peter Kassies" <p.kassies@ptt-post.nl> 06/05/01 09:22AM >>>

Shouldn't be to difficult. I have the same on my network.
First make sure squid is listning to your "inside" network ipadres.
 
Then make sure de default gateway of the system is pointing to the internet via your other nic.
Make sure the server can access a dns for resolving urls.
 
Peter
 
-----Oorspronkelijk bericht-----
Van: Mike Singleton [mailto:MSingle@davita.com]
Verzonden: Tuesday, June 05, 2001 6:11 PM
Aan: >
Onderwerp: [squid-users] dual nic setup for SQUID

I have a RH7.1 and with dual nics. How do I setup squid and/or routing? When the workstation is set for the the SQUID server, I cannot get outside the network...

DaVita Inc.
Received on Wed Jun 06 2001 - 07:05:09 MDT