Re: [squid-users] WCCP and Squid config

Hi thre
well i ve been able to make wccp work with a RH7.1
squid2.3S4 with kernel 2.4.6 with ip_wccp support
compiled in ....
the router in question is a Cisco 7513

at the same time a similar config was not working with
a cisco 6509 box !!!!!!!

i ve had a terrible experience with the default 2.3 s4
in terms of response..
see my prev mail to the list
Unfortunately no one has replied as yet
why doesnt some GURU come up with a SQuid For Linux
Tune How To
apart from joe cooper that is !!!
Best rgds
khizcode

--- Mark Tinka <aknit44@globenetcafe.net> wrote:
> hi list:
>
> i have just installed my Squid server and it's
> working beautifully, in the traditional proxy
> config.. but now i wanna engage transparent
> proxying...
>
> i have tried using the ip_gre module, but my machine
> won't accept the creation of the gre1 interface..
> attempts to download IPTunnel have been futile as
> well...
>
> so i have tried to compile the ip_wccp module, and
> got it to work with my kernel.. as in, i was able to
> load it using modprobe.... although am not exactly
> sure if it the normal one.. :-)...
>
> i have setup my configz on the squid box as follows:
>
> /etc/squid.conf
> http_port 3128
> cache_mem 32 MB
> cache_dir ufs /var/squid/cache 100 16 256
> cache_access_log /var/squid/logs/access.log
> cache_log /var/squid/logs/cache.log
> cache_store_log /var/squid/logs/store.log
> debug_options ALL,1
> refresh_pattern ^ftp: 1440 20%
> 10080
> refresh_pattern ^gopher: 1440 0%
> 1440
> refresh_pattern . 0 20%
> 4320
> reference_age 3.5 days
> acl all src 0.0.0.0/0.0.0.0
> acl manager proto cache_object
> acl localhost src 127.0.0.1/255.255.255.255
> acl allowed_hosts src 192.168.1.0/255.255.255.0
> acl SSL_ports port 443 563
> acl Safe_ports port 80 21 443 563 70 210 1025-65535
> acl Safe_ports port 280 # http-mgmt
> acl Safe_ports port 488 # gss-http
> acl Safe_ports port 591 # filemaker
> acl Safe_ports port 777 # multiling http
> acl CONNECT method CONNECT
> http_access allow manager localhost
> http_access deny manager
> http_access deny !Safe_ports
> http_access deny CONNECT !SSL_ports
> http_access allow allowed_hosts
> http_access deny all
> icp_access allow all
> miss_access allow all
> httpd_accel_host virtual
> httpd_accel_port 80
> httpd_accel_with_proxy on
> httpd_accel_uses_host_header on
> wccp_router 1.1.1.1
>
> /sbin/ipchains
> $IPCHAINS -A input -s 216.250.215.0/24 80 -d 0/0 -p
> tcp -j REDIRECT 3128
>
> Cisco 3640 router
>
> conf t
> ip wccp enable
> !
> ip wccp redirect-list 1
> !
> int e0
> ip addresses 1.1.1.1 255.255.255.0
> ip web-cache redirect
> !
> access-list 1 permit 192.168.0.0 255.255.255.0
>
> I am running Squid 2.3 on Linux 2.2.19-SMP... is
> there something i could have missed.. please
> advise..
>
> much appreciated.. thanks..
>
> regards... AKNIT
>
>
>
>
>
>
>
_____________________________________________________________
> Be different Get yourself a Globenetcafe.net email
> ID
> Uganda's Newest internet cafe www.globenetcafe.net

__________________________________________________
Do You Yahoo!?
Send instant messages & get email alerts with Yahoo! Messenger.
http://im.yahoo.com/
Received on Sat Aug 11 2001 - 01:17:20 MDT