Re: [squid-users] High load on squid machine after switching from reiserfs to ext3

Ok, nothing odd there that may explain your problem (but I don't
think you need htcp or gnuregex..)

Regards
Henrik

On Tuesday 21 May 2002 23:19, Andreas Jung wrote:
> /configure --prefix=/home/zope/opt/Squid-2.4STABLE6+ \
> --enable-gnuregex \
> --enable-async-io=20 \
> --enable-forw-via-db \
> --enable-linux-netfilter \
> --enable-cachemgr-hostname=`hostname` \
> --enable-htcp \
> --enable-referer-log
>
> Andreas
>
> On Tue, 21 May 2002 22:53:26 +0200
> "Squid Support (Henrik Nordstrom)" <hno@marasystems.com>
>
> wrote:
> > What are your configure options when you built Squid?
> >
> > Regards
> > Henrik
> >
> > On Tuesday 21 May 2002 15:27, Andreas Jung wrote:
> > > We are running Zope behind Squid 2.4Stable6 with squid
> >
> > in
> >
> > > acceleration mode. The squid box (dual Pentium III 1
> >
> > GHz, RH 7.2,
> >
> > > Linux 2.4.9-21smp, 2GB Ram) has during busy hours a
> >
> > normal load of
> >
> > > 0.2-0.3 . From time to time we see spikes over some
> >
> > hours where the
> >
> > > load average of the machine is higher than 1.5 although
> >
> > there are
> >
> > > no spikes in the CPU utilization. Also there is no
> >
> > increase in the
> >
> > > number of incoming requests.
> > >
> > > The only change we made was the switch from reiserfs to
> >
> > ext3 for
> >
> > > the cache partition since reiserfs corrupted its
> >
> > partition some
> >
> > > time ago.
> > >
> > > Any insights on this issue?
> > >
> > > Thanks,
> > > Andreas
> >
> > --
> > MARA Systems AB, Giving you basic free Squid support
> > Your source of advanced web reverse proxying solutions
> > http://www.marasystems.com/products/
Received on Wed May 22 2002 - 00:02:02 MDT