RE: [squid-users] WCCP Configuration

Dear Mahmood Ahmed

Here is the Linux configuration:

Patching Kernel with WCCP v1 Support

The following steps are needed:

1.Download the ip_wccp.c from
http://www.squid-cache.org/WCCP-support/Linux/ip_wccp.c .Compile ip_wccp.c
using the following command:

gcc -D__KERNEL__ -I/usr/src/linux-2.4.18-3/include -Wall -Wstrict-prototypes
\
-O2 -fomit-frame-pointer -fno-strict-aliasing -pipe -fno-strength-reduce \
-m386 -DCPU=386 -DMODULE -DMODVERSIONS -include \
/usr/src/linux-2.4.18-3/include/linux/modversions.h -c ip_wccp.c

After this, the compiled ip_wccp.o will be created.

2.Copy ip_wccp.o to /lib/modules/2.4.18-3/kernel/net/ipv4/ip_wccp.o.

Linux@Box#cp ip_wccp.o /lib/modules/2.4.18-3/kernel/net/ipv4/ip_wccp.o.

Then edit /lib/modules/2.4.18-3/modules.dep
Add the line:
/lib/modules/2.4.18-3/kernel/net/ipv4/ip_wccp.o:

3. Test the module with:
/sbin/modprobe ip_wccp
/sbin/depmod -a -e
This should report no errors.

-----Original Message-----
From: Mahmood Ahmed [mailto:braveheart@buraak.net.pk]
Sent: Thursday, February 26, 2004 2:42 AM
To: adeel@worldcall.net.pk
Cc: squid-users@squid-cache.org
Subject: RE: [squid-users] WCCP Configuration

Hello Adeel

can you please also explain the step by step (like you did below) wccp
configuration for OS (Redhat 9.0) and Squid too.

Regards

Mahmood Ahmed
Buraak Telecommunications Pvt. Ltd.
---------------------------------------------------------
This mail has been sent using Buraak Net's Mailing System
(http://www.buraak.net.pk)

---------- Original Message -----------
From: "Adeel Asher" <adeel@worldcall.net.pk>
To: "'squid'" <squid-users@squid-cache.org>
Sent: Wed, 25 Feb 2004 10:34:45 +0500
Subject: RE: [squid-users] WCCP Configuration

> Here You Go
>
> Router #
> Router (config)#  ip wccp version 1
> Router (config)#  ip wccp web-cache redirect-list 125
> Router (config)#  ip wccp web-cache redirect out
> Router (config)#  ip wccp redirect exclude in
> Router (config)#  ip wccp web-cache redirect out
>
> Access-List 125
>
> permit ip 192.168.92.0 0.0.0.255 any
> permit ip 192.168.93.0 0.0.0.255 any
> permit ip 192.168.94.0 0.0.0.255 any
> permit ip 192.168.95.0 0.0.0.255 any
> permit ip 192.168.96.0 0.0.0.255 any
> permit ip 192.168.97.0 0.0.0.255 any
> permit ip 192.168.98.0 0.0.0.255 any
>
> All permitted hosts in this access list will be redirected to squid for
web
> traffic.
>
> Router #Conf t
> Router (config)#
> Router (config)#   interface fastethernet 0
> Router(config-if)# ip wccp web-cache redirect out
>
> Router # Conf t
> Router(config)#
> Router(config)#    Interface serial 0
> Router(config-if)# ip wccp redirect exclude in
> Router(config-if)# ip wccp web-cache redirect out
>
> I am assuming that your router serial is connected to WAN and FastEthernet

> to LAN. If you have more than one serials you will have to enable it on
all.
>
> Regards,
> Adeel Asher
> WorldCALL Multimedia
> Lahore
> PK
>
> -----Original Message-----
> >From: Danish Khan [mailto:danish.khan@go4b.net]
>
> >Sent: Wednesday, February 25, 2004 4:31 AM
> >T0: 'squid'
> >Subject: [squid-users] WCCP Configuration
>
> >Can any body please explain the router configuration for WCCP.
>
> >Danish Khan
------- End of Original Message -------