Re: [squid-users] tune up

Thank you very much Askar,

Now it's the only the option --with-aufs-threads=1024 is not clear, what is
this option and is 1024 value is ok, anybody can you please enlighten me?

wennie

----- Original Message -----
From: "Askar" <askar@askarali.info>
To: <squid-users@squid-cache.org>
Sent: Monday, May 30, 2005 3:39 PM
Subject: Re: [squid-users] tune up

> Wennie V. Lagmay wrote:
>
>> Ok if im going to recompile it again, i just start squid and it should be
>> working again right?
>
> yes
>
>> second if i recompile it --enable-storeio="aufs" do I need to
>> enable --with-aufs-threads=1024 and is a 1024 value is ok?
>
> I don't have defined -with-aufs-threads=1024 options while compiling squid
> and its working just cool
>
>>
>> during recompilation, can I let squid running? aftrer I recompile it I
>> sould only issue a command squid -z and suid start am I right?
>
> yep let squid serving clients, don't issue squid -z command no need to do
> so. Before giving "make install" command for safty cp your squid.conf file
> to another location if you want to reuse the same squid.conf and then
> issue "make install" and place the squid.conf in /usr/local/squid/etc, and
> change the cache_dir line only replace diskd with aufs.
> then shutdown the squid and restart it.
>
>>
>> what is the posiblity that my squid will not start?
>>
> I'm sure it will start with no problem ;)
>
>> Thanks,
>>
>> Wennie
>>
>>
>>
>>
>>> I'm affraid you have to recompile squid if you didnt enable aufs
>>> eariler, you can check squid compilation option with "squid -v" , see if
>>> there "--enable-storeio=aufs,coss,diskd,ufs"
>>> Again if you don't see aufs support then don't hestitate to recompile
>>> squid.
>>>
>>> regards
>>>
>>> askar
>>
>>
>>
>>
>
Received on Mon May 30 2005 - 06:46:06 MDT