Re: [squid-users] tcp_outgoing_address not working

Upgraded to latest squid, same result. Squid still uses the wrong
outgoing address whatever I set with tcp_outgoing_address :(

Any ideas?

Bgs wrote:
> Hi all,
>
> For some reason tcp_outgoing_address is not working for me, even though
> the setup is simple and look like just the zillion example configs I
> found around the net.
>
>
> Setup: Linux box with 2.5.STABLE13 and several outside IPs (single
> connection):
>
> 2: eth1: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000
> link/ether 00:05:5d:64:89:a0 brd ff:ff:ff:ff:ff:ff
> inet 1.2.3.146/28 brd 1.2.3.159 scope global eth1
> inet 1.2.3.147/28 brd 1.2.3.159 scope global secondary eth1
> inet 1.2.3.148/28 brd 1.2.3.159 scope global secondary eth1
> inet 1.2.3.149/28 brd 1.2.3.159 scope global secondary eth1
> inet 1.2.3.150/28 brd 1.2.3.159 scope global secondary eth1
> inet 1.2.3.151/28 brd 1.2.3.159 scope global secondary eth1
> inet 1.2.3.152/28 brd 1.2.3.159 scope global secondary eth1
> inet 1.2.3.153/28 brd 1.2.3.159 scope global secondary eth1
> inet 1.2.3.154/28 brd 1.2.3.159 scope global secondary eth1
> inet 1.2.3.155/28 brd 1.2.3.159 scope global secondary eth1
> inet 1.2.3.156/28 brd 1.2.3.159 scope global secondary eth1
> inet 1.2.3.157/28 brd 1.2.3.159 scope global secondary eth1
> inet 1.2.3.158/28 brd 1.2.3.159 scope global secondary eth1
>
> We used to NAT different internal IPs to different outside IPs, I want
> the same result with squid. Here is the relevant portion of my squid.conf:
>
> acl src_1 src 10.0.0.105
> acl src_2 src 10.0.0.106
> acl src_3 src 10.0.0.107
> acl src_4 src 10.0.0.108
> acl src_5 src 10.0.0.109
> acl src_6 src 10.0.0.110
> acl src_7 src 10.0.0.111
> acl src_8 src 10.0.0.112
> acl src_9 src 10.0.0.113
> acl src_10 src 10.0.0.114
> acl src_11 src 10.0.0.115
> acl src_bgstest src 10.0.0.136
>
>
> tcp_outgoing_address 1.2.3.147 src_1
> tcp_outgoing_address 1.2.3.148 src_2
> tcp_outgoing_address 1.2.3.149 src_3
> tcp_outgoing_address 1.2.3.150 src_4
> tcp_outgoing_address 1.2.3.151 src_5
> tcp_outgoing_address 1.2.3.152 src_6
> tcp_outgoing_address 1.2.3.153 src_7
> tcp_outgoing_address 1.2.3.154 src_8
> tcp_outgoing_address 1.2.3.155 src_9
> tcp_outgoing_address 1.2.3.156 src_10
> tcp_outgoing_address 1.2.3.157 src_bgstest
>
> tcp_outgoing_address 1.2.3.146
>
>
> Whatever IP I use, the source IP will be 1.2.3.146. The funny part comes
> now: I changed the last (default) rule to .148 and squid still uses the
> .146 address.
>
> Do you have any ideas why is squid sticking to the default system IP and
> not use any IP given in tcp_outgoing_address?
>
> Thanks
> Bgs
Received on Mon Mar 12 2007 - 03:44:18 MDT