Re: [squid-users] TPROXY Squid Error.

I use two ports in Micortik Router. one for WAN and other for LAN, I
have No rules setup in Router except the natting Src and Dst for
private to public IP and vice versa.

There are two nics in squid box. but I am using only one.

The Lan From router is Connected to switch and the squid nic is also
connected to the same vlan of the switch.

and i'm using a box connected to the the same vlan of the switch to test squid.

Simple . Router to Switch
Squid to Switch
Test to Switch

All in the same Vlan.

Thanks,
Ganesh J

On Thu, Jul 10, 2014 at 6:04 AM, Nyamul Hassan <nyamul_at_gmail.com> wrote:
> What are the rules in Mikrotik that you are using? What is the
> network diagram? How many interfaces on Mikrotik are you using for
> this purpose? How many NICs are there on the Squid box? Can you give
> an idea of your network diagram?
>
> Also, a few days ago, I also posted the rules that I am using in
> Mikrotik. Can you check if they match yours?
>
> Regards
> HASSAN
>
> On Thu, Jul 10, 2014 at 6:28 AM, Info OoDoO <info_at_oodoo.co.in> wrote:
>> Hi,
>> I'm using Microtik 1100 AH X2 Router,
>>
>> here is my Basic Data from your latest script.
>>
>> http://pastebin.com/GHkD5yYx
>>
>> Thanks,
>> Ganesh J
>>
>>
>> On Wed, Jul 9, 2014 at 1:08 AM, Eliezer Croitoru <eliezer_at_ngtech.co.il> wrote:
>>> What router are you using??
>>>
>>> Eliezer
>>>
>>> P.S. I will be at the squid irc channel for about couple hours
>>> http://webchat.freenode.net/?channels=squid
>>>
>>>
>>> On 07/08/2014 10:19 PM, Info OoDoO wrote:
>>>>
>>>> Configured Squid 3.4.6 again with all the options, still facing the same
>>>> issue.
>>>>
>>>> Thanks,
>>>> Ganesh J
>>>>
>>>>
>>>> On Tue, Jul 8, 2014 at 11:55 PM, Nyamul Hassan <nyamul_at_gmail.com> wrote:
>>>>>
>>>>> We were in the same problem just a few days ago. Can you recompile and
>>>>> check?
>>>>>
>>>>> Also, since you are compiling, then can you also try the latest stable
>>>>> version 3.4.6?
>>>>>
>>>>> Regards
>>>>> HASSAN
>>>>>
>>>>>
>>>>> On Wed, Jul 9, 2014 at 12:24 AM, Info OoDoO <info_at_oodoo.co.in> wrote:
>>>>>>
>>>>>> Sorry, I installed it recently and it was not there when i compiled
>>>>>> and configured squid from source.
>>>>>>
>>>>>> Thanks,
>>>>>> Ganesh J
>>>>>>
>>>>>>
>>>>>> On Tue, Jul 8, 2014 at 11:52 PM, Info OoDoO <info_at_oodoo.co.in> wrote:
>>>>>>>
>>>>>>> Yes.. it is installed..
>>>>>>>
>>>>>>> libcap-devel.x86_64 2.16-5.5.el6 @base
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Ganesh J
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Jul 8, 2014 at 11:49 PM, Nyamul Hassan <nyamul_at_gmail.com>
>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>> For your kind attention, i have not installed Squid 3.1.10 from YUM.
>>>>>>>>>> I
>>>>>>>>>> have Compiled and installed from the source with the following
>>>>>>>>>> options.
>>>>>>>>>>
>>>>>>>>>> http://pastebin.com/jFhzd3qj
>>>>>>>>>>
>>>>>>>>
>>>>>>>> Oh! If you did compile it, then can you check if you have
>>>>>>>> "libcap-devel" installed?
>>>>>>>>
>>>>>>>> Regards
>>>>>>>> HASSAN
>>>
>>>
Received on Thu Jul 10 2014 - 00:55:06 MDT