RE: [squid-users] dual nic setup for SQUID

Mike,

Here is a little drawing (how it sorta looks in our network)

    internet
        |
    firewall---------------------------------------- dmz lan
                                |
                            proxyserver
                                |
                -------------------------------------- end user lan

So what you have to do is configure the nics with a different ipadres. Of
course the ipadres for the internal side is the ipaddress on the end user
lan.
I have proxy listning to port 8080 so all endusers have to configure the
internal ipadres of the proxyserver and the port in their browser.

The proxyserver has a dns on the internet in its /etc/resolv.conf and
resolves all urls and fetches the content from websites on the internet.

Peter

  -----Oorspronkelijk bericht-----
  Van: Mike Singleton [mailto:MSingle@davita.com]
  Verzonden: Tuesday, June 05, 2001 6:25 PM
  Aan: p.kassies@ptt-post.nl
  Onderwerp: RE: [squid-users] dual nic setup for SQUID

  Cool... thanks... but I have a few questions...
  How do I configure Squid to listen inside??

>>> "Peter Kassies" <p.kassies@ptt-post.nl> 06/05/01 09:22AM >>>

  Shouldn't be to difficult. I have the same on my network.
  First make sure squid is listning to your "inside" network ipadres.

  Then make sure de default gateway of the system is pointing to the
internet via your other nic.
  Make sure the server can access a dns for resolving urls.

  Peter

    -----Oorspronkelijk bericht-----
    Van: Mike Singleton [mailto:MSingle@davita.com]
    Verzonden: Tuesday, June 05, 2001 6:11 PM
    Aan: >
    Onderwerp: [squid-users] dual nic setup for SQUID

    I have a RH7.1 and with dual nics. How do I setup squid and/or routing?
When the workstation is set for the the SQUID server, I cannot get outside
the network...
Received on Wed Jun 06 2001 - 04:23:50 MDT